Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 279

Using the Optional Bobbin Winder When winding the bobbin thread onto a metal bobbin, use the optional bobbin winder. The procedures for using the optional bobbin winder are described below. Precautions For precautions concerning the power supply, refer to page 34. CAUTION ● Be sure to place the bobbin winder on a level, stable surface. ● Only use the bobbins supplied with this bobbin winder. Optional bobbin winder and its accessories Check that the following bobbin winder and accessories are included. 1. 2. 3. 4. 5. 1 Main power switch 6. 7. 8. 9. 2 Bobbin winder shaft 3 Hole for thread guide 4 Hole for spool pin 5 DC input connector 10. No. Name Part Code No. Name Part Code 7 1 Bobbin winder PRBW1 6 Power supply cord* - 2 Spool pin XC5949-051 7 Metal bobbin × 5 100376-053 3 Spool cushion XA0679-050 8 Spool cap 130012-054 4 Thread guide XC6644-151 9 Weight (L) XC5974-151 5 AC adapter XE1610-101 10 Weight (S) XC6631-051 * Visit your authorized Brother dealer. Memo ● The part code of the bobbin winder set may differ depending on the country/area where the machine was purchased. ● Depending on the model you purchased, the bobbin winder may be included with the machine. Using the Optional Bobbin Winder 277