Epson 9880 Printer Guide - Page 149

Solving Problems, Message, Explanation, Response

Page 149 highlights

Solving Problems | 169 Message Explanation Response COMMAND ERROR CHECK DRIVER SETTINGS You may be using the wrong printer driver. Damaged data was sent to the printer or the data has an incorrect command. Press and hold the Pause button for 3 seconds to cancel the print job. Make sure you installed the correct driver for your printer. The driver's ink type configuration is not correct for the ink in the printer. Make sure the ink configuration is correct (see page 151). CONVERSION CRTG LIFE CONVERSION CRTG NEAR END OF SERVICE LIFE The conversion cartridge will need to be replaced soon. (Remaining service life is displayed on the LCD.) Press the Pause button to continue. CONVERSION CRTG LIFE REPLACE CONVERSION CRTG WITH A NEW ONE The conversion cartridge needs to be replaced. Replace the conversion cartridge with a new one. Or, complete the replacement of black ink by pressing the Pause button. COVER OPEN Front cover is open. Close the front cover. CLOSE COVER F/W INSTALL ERROR UPDATE FAILED RESTART THE PRINTER Firmware update failed. Restart the printer, then update the firmware again; see page 46 for instructions. INK CARTRIDGE An ink lever is raised, but no INSTALL INK CARTRIDGE cartridge is installed. Install the missing ink cartridge. INK CARTRIDGE NON-GENUINE CARTRIDGE! MAY NOT PERFORM AT OPTIMUM. CONTINUE? A non-genuine ink cartridge is installed. Press the r button to select NO and replace the ink cartridge with a genuine Epson ink cartridge; see page 144. Otherwise, press l to select YES. INK CARTRIDGE PLEASE USE GENUINE EPSON INK CARTRIDGES A non-genuine ink cartridge is installed. Replace the ink cartridge with a genuine Epson ink cartridge; see page 144. INK CARTRIDGE REPLACE INK CARTRIDGE Ink cartridge(s) are expended (printing stops). Replace the ink cartridge(s) indicated on the LCD display; see page 144. 169

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176

169
Solving Problems
|
169
COMMAND ERROR
CHECK DRIVER
SETTINGS
You may be using the wrong
printer driver.
Damaged data was sent to the
printer or the data has an
incorrect command.
Press and hold the
Pause button for
3 seconds to cancel the print job. Make sure
you installed the correct driver for your printer.
The driver’s ink type
configuration is not correct for
the ink in the printer.
Make sure the ink configuration is correct (see
page 151).
CONVERSION CRTG LIFE
CONVERSION CRTG
NEAR END OF SERVICE
LIFE
The conversion cartridge will
need to be replaced soon.
(Remaining service life is
displayed on the LCD.)
Press the
Pause button to continue.
CONVERSION CRTG LIFE
REPLACE CONVERSION
CRTG WITH A NEW ONE
The conversion cartridge needs
to be replaced.
Replace the conversion cartridge with a new
one. Or, complete the replacement of black ink
by pressing the
Pause button.
COVER OPEN
CLOSE COVER
Front cover is open.
Close the front cover.
F/W INSTALL ERROR
UPDATE FAILED
RESTART THE PRINTER
Firmware update failed.
Restart the printer, then update the firmware
again; see page 46 for instructions.
INK CARTRIDGE
INSTALL INK CARTRIDGE
An ink lever is raised, but no
cartridge is installed.
Install the missing ink cartridge.
INK CARTRIDGE
NON-GENUINE
CARTRIDGE! MAY NOT
PERFORM AT OPTIMUM.
CONTINUE?
<YES NO>
A non-genuine ink cartridge is
installed.
Press the
r
button to select
NO
and replace
the ink cartridge with a genuine Epson ink
cartridge; see page 144. Otherwise, press
l
to
select
YES
.
INK CARTRIDGE
PLEASE USE GENUINE
EPSON INK CARTRIDGES
A non-genuine ink cartridge is
installed.
Replace the ink cartridge with a genuine Epson
ink cartridge; see page 144.
INK CARTRIDGE
REPLACE INK
CARTRIDGE
Ink cartridge(s) are expended
(printing stops).
Replace the ink cartridge(s) indicated on the
LCD display; see page 144.
Message
Explanation
Response