Epson 9880 Printer Guide - Page 29
Unpacking the Printer - paper roll spindle
UPC - 010343866843
View all Epson 9880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting Up the Printer | 31 4. Insert the support bar into one of the base sections as shown. Then attach it with two bolts using the included wrench. Leave the bolts a little loose, so that you can adjust the position when you insert the bolts at the other end. 5. Attach the base section to the other end. 6. Tighten all four bolts securely. Unpacking the Printer 1. Open the box and remove the roll paper, spindle, polystyrene foam, and cardboard cushions. 31
31
Setting Up the Printer
|
31
4.
Insert the support bar into one of the base sections as shown. Then
attach it with two bolts using the included wrench.
Leave the bolts a little loose, so that you can adjust the position when
you insert the bolts at the other end.
5.
Attach the base section to the other end.
6.
Tighten all four bolts securely.
Unpacking the Printer
1.
Open the box and remove the roll paper, spindle, polystyrene foam, and
cardboard cushions.