Epson SureColor S70675 User Manual - Page 11
Waste ink bottle, Waste ink bottle holder
View all Epson SureColor S70675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
6 Tensioner The tensioner maintains tension to prevent the media sagging as it is taken up. 7 Roll core holder locking screw The locking screws keep the roll core holders in place once they have been attached to the roll core. There are two locking screws: one on the left and one on the right. 8 Roll support Rest media temporarily on these supports when removing the take-up roll. There are two supports: one on the left and one on the right. 9 Auto switch Use this switch to select the auto take-up direction. Choose Off to disable auto take-up. 10 Manual switch Use this switch to select the manual take-up direction.AutoThe selected option takes effect when the Auto switch is in the Off position. 11 Casters There are two casters on each leg. Once installation is complete, the front casters should be kept locked while the printer is in use. 12 Airflow vents These vents allow air to flow into the printer. Do not obstruct these vents. 13 Waste ink bottle holder Place the waste ink bottle in this holder. 14 Adjuster The adjusters keep the printer in place. After installing the printer, keep it securely in place during use. 15 Waste ink bottle Waste ink collects in this bottle. Replace with a new waste ink bottle when the level approaches the line. 16 Waste ink tube Waste ink is discharged from this tube. Be sure the end of this tube is in the waste ink bottle while the printer is in use. 17 Ink cartridges Install all ink cartridges into each slot. Depending on the selected ColorMode, install the replacement cartridge or cleaning cartridge. 18 Lock levers Raise the levers to unlock the ink cartridges prior to removal. Lower the levers to lock the cartridges in place after insertion. 19 Cartridge check lamp This lamp lights when an ink cartridge error occurs. On An error occurred. Check the contents of the error on the control panel's screen. Off No error. 20 AC inlet #1/AC inlet #2 Connects the power cable. Be sure to connect both cables. 21 LAN port See "LAN Port" on page 19. Introduction 11