Epson SureColor S70675 User Manual - Page 237
Getting Ready, Post-Move Setup, Checking for Clogged
View all Epson SureColor S70675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Getting Ready 1. Confirm that the printer is off. 2. Remove the waste ink bottle. See "Replacing the waste ink bottle" on page 167. 3. Disconnect the power cords and all other cables. 4. Remove media from the media feeding unit and auto take-up reel unit. 5. Unlock the stand. Release the caster locks on the left and right legs and fully raise the adjusters. 6. Move the printer. Important: Use the casters on the dedicated printer stand to move the printer indoors a short distance over a level floor. They can not be used for transportation. Post-Move Setup After moving the printer, follow the steps below to ready it for use. 1. Check that the new location is appropriate. See the Setup Guide. 2. Plug in the power cables and turn the printer on. See the Setup Guide. 3. Perform a nozzle check to check for clogged nozzles. See "Checking for Clogged Nozzles" on page 181. Appendix 237