Epson SureColor S70675 User Manual - Page 97
Take up with the printed side facing out
View all Epson SureColor S70675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Important: Once part A is hidden, do not turn the handle any further. Failure to observe this precaution could damage the roll core holder. If part A is still visible even after the handle has been turned fully, rewind the handle. Then loosen the left roll core holder fixing screw and reattach the roll core. For the subsequent steps, see the next section or "Take up with the printed side facing in" on page 102. Take up with the printed side facing out 1. Cut the paper tape approximately 60 cm (24 inches) in length, and paste it approximately in the center of the media using adhesive tape. 2. Hold down the u button until the tip of the tape reaches the center of the pipe. Basic Operations 97
Basic Operations
97
For the subsequent steps, see the next section or “Take up with the printed side facing in”
on page 102.
Take up with the printed side facing out
1.
Cut the paper tape approximately 60 cm (24 inches) in length, and paste it
approximately in the center of the media using adhesive tape.
2.
Hold down the
u
button until the tip of the tape reaches the center of the pipe.
Important:
Once part A is hidden, do not turn the handle any further. Failure to observe this
precaution could damage the roll core holder. If part A is still visible even after the
handle has been turned fully, rewind the handle. Then loosen the left roll core holder
fixing screw and reattach the roll core.