Epson SureColor S70675 User Manual - Page 217

Messages Pressure Roller Error Pressure rollers are positioned incorrectly. Release media loading lever and reposition rollers. Ink Layering Error Pressure rollers are positioned incorrectly. Reposition rollers. Roll Type Error Release and then reset the media loading lever, then match Roll Type setting to actual media. Press # and perform Head Maintenance. What to do One of the following has occurred. Reposition the rollers as described in "Printable Area." None of the rollers is positioned inside the bounds of the black labels. Only one of the rollers is positioned inside the bounds of the black labels. The rollers at the edges of the media are not the same type. (A high pressure roller is at one edge, a low pressure roller at the other.) On is selected for Media Size Check in the printer settings menu and a roller is positioned in a black label that is not over the media. Two rollers are positioned inside the bounds of the same black label. See "Printable area - S70675/S50675" on page 123 and "Printable Area - S30675" on page 126. You are using the low pressure rollers. Use the high pressure rollers for ink layering. Does the Roll Type specified at media loading match the actual roll type? Raise the media loading lever to resolve the error. Lower the media loading lever again, and follow the on-screen instructions of the printer to correctly specify the Roll Type. This message is displayed when regular cleaning has not been performed more than one week. If you continue to use the printer without performing regular cleaning, ink drops, nozzle clogging, or print head damage may occur in the printer. See "Regular Cleaning" on page 137. When a Maintenance Call/Service Call Occurs Error messages Maintenance Request Replace Part Soon/Replace Part Now XXXXXXXX Call For Service XXXX Error XXXX Power off and then on. If this doesn't work, note the code and call for service. What to do A part used in the printer is nearing the end of its service life. Contact your dealer or Epson Support and tell them the maintenance request code. You cannot clear the maintenance request until the part is replaced. A service call occurs if you continue to use the printer. A call for service occurs when: The power cable is not connected securely An error that cannot be cleared occurs When a call for service has occurred, the printer automatically stops printing. Turn off the printer, disconnect the power cable from the outlet and from the AC inlet on the printer, and then reconnect. Turn on the printer again multiple times. If the same call for service is displayed on the LCD panel, contact Epson Support for assistance. Tell them the call for service code is "XXXX". Problem Solver 217