Epson SureColor S70675 User Manual - Page 236
Moving and Transporting the Printer, Moving the Printer
View all Epson SureColor S70675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Standard Roll Media System Roll core size Roll outer diameter Media width Media thickness Roll weight 2 or 3 inches Up to 250 mm (9.8 inches) 300* to 1626 mm (11.8 to 64 inches) Up to 1 mm (0.04 inch) Up to 40 kg (88.2 lb) *Minimum media width for ink layering is 508 mm (20 in.) Heavy Roll Media System Roll core size Roll outer diameter Media width Media thickness Roll weight 2 or 3 inches Up to 300 mm (11.8 inches) 300* to 1626 mm (11.8 to 64 inches) Up to 1 mm (0.04 inch) Up to 80 kg (176.4 lb) *Minimum media width for ink layering is 508 mm (20 in.) Moving and Transporting the Printer This section describes how to move and transport the product. Moving the Printer This section assumes that the product is being moved to another location on the same floor without traversing stairs, ramps, or lifts. See below for information on moving the printer between floors or to another building. See "Transportation" on page 238. c Caution: Do not tilt the product more than 10 degrees forward or back while moving it. Failure to observe this precaution could result in the printer falling over, causing accidents. Important: Do not remove the ink cartridges. Failure to observe this precaution could cause the print head nozzles to dry out. Appendix 236