Epson SureColor S70675 User Manual - Page 120
Standard Auto, Ready, Block pattern, Check the printed adjustment pattern.
View all Epson SureColor S70675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
8. Use the d/u buttons to select either one of the following modes, and press the Z button. ❏ Standard (Auto): This mode automatically performs pattern printing and adjustment. When Ready is displayed on the control panel, adjustment is completed. ❏ Standard (Manual): Press the Z button to proceed to Step 9. ❏ Block pattern: The adjustment menu selection screen is displayed. Select any menu, and press the Z button twice to proceed to Step 9. 9. Check the printed adjustment pattern. Select "2" in the cases shown below: In Standard (Manual) In Block pattern C1 1 2 3 10. When the screen to enter a numeric value is displayed, use the u/d buttons to enter the pattern number recorded in Step 9 and press the Z button. Basic Operations 120
Basic Operations
120
8.
Use the
d
/
u
buttons to select either one of the following modes, and press the
Z
button.
❏
Standard (Auto)
: This mode automatically performs pattern printing and
adjustment. When
Ready
is displayed on the control panel, adjustment is
completed.
❏
Standard (Manual)
: Press the
Z
button to proceed to Step 9.
❏
Block pattern
: The adjustment menu selection screen is displayed. Select any
menu, and press the
Z
button twice to proceed to Step 9.
9.
Check the printed adjustment pattern.
Select “2” in the cases shown below:
In
Standard (Manual)
In
Block pattern
10.When the screen to enter a numeric value is displayed, use the
u
/
d
buttons to enter the
pattern number recorded in Step 9 and press the
Z
button.
1
C1
2
3