Epson SureColor S70675 User Manual - Page 127

* When Media Size Check is set to Off, this is 1,626 mm (64 inches) regardless of the width of the loaded media. 1 to 4 indicates the margins on all four sides. Margin Position 1 Bottom1 2 Top1 3 Left2, 3 4 Right2, 3 Explanation This can be configured in a RIP. If the settings are outside the available range, they are changed to 5 mm and 17 mm (0.2 and 0.7 inch) respectively to maintain media feeding accuracy. This can be configured in a RIP. Differs by the length the media was pulled when the media is loaded. For continuous printing, although the margins set in the RIP are added, if the setting is less than 5 mm (0.2 inch), it is changed to 5 mm to maintain media feeding accuracy. The value selected for Side Margin(Left) in the printer's setup menu. The default setting is 5 mm (0.2 inch). The total of the values selected for Print Start Position and Side Margin(Right) in the printer's setup menu. The default setting for Print Start Position is 0 mm and Side Margin(Right) is 5 mm (0.2 inch). Available Setting Range 5 to 17 mm (0.2 to 0.7 inch) 5 mm (0.2 inch) or more 3 to 25 mm (0.1 to 1 inch) 3 to 825 mm (0.1 to 32.5 inches) 1 The configured margin and the actual print results may differ depending on the RIP being used. Contact the RIP manufacturer for more information. 2 This may be available in the RIP depending on the software RIP being used. Contact the RIP manufacturer for more information. Basic Operations 127