Epson SureColor S70675 User Manual - Page 221
The print is not positioned properly on the media., Vertical ruled lines are misaligned.
View all Epson SureColor S70675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
o Have you compared the printing result with the image on the display monitor? Since monitors and printers produce colors differently, printed colors will not always match on-screen colors perfectly. o Was a printer cover opened during printing? Opening covers during printing causes the print head to stop abruptly, resulting in uneven colors. Do not open the covers while printing is in progress. o Is Ink Low displayed on the control panel's screen? The print quality may decline when the ink is low. We recommend replacing the ink cartridge with a new one. If there is a difference in color after replacing the ink cartridge, try performing head cleaning a few times. o Shake ink cartridges. Components may have sedimented from (settled to the bottom of) the white or metallic silver ink. Shake the cartridge thoroughly and perform Ink Circulation several times. See "Shaking cartridges" on page 163 and "Ink Refresh" on page 188. If the problem persists, perform Ink Refresh. The print is not positioned properly on the media. o Is the media loaded correctly and are the margins correct? If the media is not loaded correctly, the results may be off center or part of the data may not be printed. You should also check whether the correct options are selected for Side Margin and Print Start Position in the setup menu. See "Loading Media - S70675/S50675" on page 41, "Loading Media - S30675" on page 65, and "The Printer Setup Menu" on page 208. o Is the media skewed? If Off is selected for Media Skew Check in the setup menu, printing will continue when the media is skewed and data will appear outside the print area. Set Media Skew Check to On in the Menu. See "The Printer Setup Menu" on page 208. o Is the media wide enough for the print data? Although printing normally stops if the print image is wider than the media, data will be printed beyond the edges of the media if Off is selected for Media Size Check in the setup menu. Choose On for Media Size Check in the setup menu. See "The Printer Setup Menu" on page 208. Vertical ruled lines are misaligned. o Is the media wavy? Certain types of media may develop waves under some conditions (humidity and temperature) while installed in the printer. If a wave has developed, press the d button in the control panel to feed the media and avoid the affected area. We recommend that you lower the temperature and humidity to prevent waves developing. o Is the print head misaligned? If the print head is misaligned, ruled lines may be misaligned accordingly. In this case, select Media Adjust - Head Alignment in the media settings to adjust a print head misalignment that occurs during printing. See "Head Alignment" on page 119. Problem Solver 221