Epson SureColor S70675 User Manual - Page 53

20. Close the front cover. When using the auto take-up reel, see "Using the Auto Take-up Reel Unit" on page 92. When not using the auto take-up reel, proceed to check the media and change settings. See "Viewing and Changing Media Settings" on page 85. Using the optional heavy roll media feeding unit This section uses the S70675 to illustrate how to load media when the optional heavy roll media feeding unit is installed. c Caution: Because the media is heavy, it should not be carried by one person. When loading or removing the media, use at least two persons. Using a lifter is recommended when handling a media that is 40 kg (88.3 lb) or heavier. The explanation that follows assumes that a lifter is used. The following types of lifter can be used: ❏ Fork or platform thickness: 28 mm (1.10 inches) or less ❏ The fork or platform can be lowered to approximately 190 mm (7.5 inches) from the floor. Before loading, be sure to read "Notes on Loading Media" on page 38. 1. Turn on the printer and wait until Load media appears on the screen. Important: When spot color inks are installed, circulation will be performed automatically to prevent ink accumulating in the printer and causing clogs when the printer is not in use. Because turning the printer off prevents automatic circulation from being performed, leading to printer malfunction, we recommend that the printer not be turned off. 2. Open the front cover and move the media holding plates out of the way. Basic Operations 53