Epson SureColor S70675 User Manual - Page 110
Before Printing
View all Epson SureColor S70675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Before Printing To maintain print quality, perform the following inspection before starting work each day. ❏ Check the amount of ink remaining. If ink is expended during printing, printing can be resumed once the affected cartridge has been replaced. However, when replacing ink during a print job, you may see a difference in color depending on the drying conditions. If you know that the print job will be a large one, we recommend that you use new cartridges to replace those that are running low before you start. The old cartridges can be reinserted and used at a later date. Ink level is shown by an icon. See "Understanding the Display" on page 22. If you need to replace cartridges, see "Replacing and Shaking Ink Cartridges" on page 163. ❏ Shake spot color inks. Spot color inks must be removed and shaken once every 24 hours. Although a message is displayed in the control panel 24 hours after the inks were last removed, we recommend that they be removed and shaken before the start of work. See "Replacing and Shaking Ink Cartridges" on page 163. ❏ Print a check pattern. Print a check pattern to check for clogged nozzles. Perform head cleaning if parts of the pattern are faint or missing. See "Checking for Clogged Nozzles" on page 181 and "Head Cleaning" on page 183. Basic Operations 110