HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Configuration Guide - Page 103
Displaying and maintaining software image settings, Software upgrade configuration example, Network
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Step 5. (Optional.) Verify the software image settings. Command display boot-loader [ slot slot-number ] Remarks Verify that the current software images are the same as the startup software images. Displaying and maintaining software image settings Execute display commands in any view. Task Display current software images and startup software images. Command display boot-loader [ slot slot-number ] Software upgrade configuration example Network requirements Use the file startup-a2105.ipe to upgrade software images for the IRF fabric in Figure 27. Figure 27 Network diagram Internet 2.2.2.2/24 Master (Member ID = 1) Subordinate (Member ID = 2) IRF link IRF 1.1.1.1/24 TFTP server Configuration procedure # Configure IP addresses and routes to make sure the device and the TFTP server can reach each other. (Details not shown.) # Complete TFTP settings on both the device and the TFTP server. (Details not shown.) # Display information about the current software images. display version 96