HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Configuration Guide - Page 20
For example, command to a file, use one of the following commands in any view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Use one of the following methods to save the output from a display command: • Save the output to a separate file. Use this method if you want to use one file for a single display command. • Append the output to the end of a file. Use this method if you want to use one file for multiple display commands. To save the output from a display command to a file, use one of the following commands in any view: Task Save the output from a display command to a separate file. Append the output from a display command to the end of a file. Command display command > filename display command >> filename For example: # Save the VLAN 1 settings to a separate file named vlan.txt. display vlan 1 > vlan.txt # Verify whether the VLAN 1 settings are saved to file vlan.txt. more vlan.txt VLAN ID: 1 VLAN type: Static Route interface: Not configured Description: VLAN 0001 Name: VLAN 0001 Tagged ports: None Untagged ports: Ten-GigabitEthernet1/1/5 # Append the VLAN 999 settings to the end of file vlan.txt. display vlan 999 >> vlan.txt # Verify whether the VLAN 999 settings are appended to the end of file vlan.txt. more vlan.txt VLAN ID: 1 VLAN type: Static Route interface: Not configured Description: VLAN 0001 Name: VLAN 0001 Tagged ports: None Untagged ports: Ten-GigabitEthernet1/1/5 VLAN ID: 999 VLAN type: Static Route interface: Configured IP address: 192.168.2.1 Subnet mask: 255.255.255.0 Description: For LAN Access Name: VLAN 0999 Tagged ports: None 13