HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Configuration Guide - Page 125
from the TFTP server., Test the connectivity between the device and the TFTP server. - ethernet blade switch
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Boot image: flash:/6125xlg-cmw710-boot-r2306.bin Boot image version: 7.1.035, Release 2306 HP 6125XLG Blade Switch with 2 Processors 2048M bytes SDRAM 4M bytes Nor Flash Memory 512M bytes Nand Flash Memory Config Register points to Nand Flash # Configure an IP address and a gateway for the management Ethernet interface. system-view [boot] interface m-eth0 [boot-m-eth0] ip address 1.1.1.1 16 [boot-m-eth0] ip gateway 1.1.1.2 # Test the connectivity between the device and the TFTP server. ping 1.2.1.1 PING 1.2.1.1(1.2.1.1):56 data bytes 64 bytes from 1.2.1.1:seq=0 ttl=64 time=0.160 ms 64 bytes from 1.2.1.1:seq=1 ttl=64 time=0.062 ms 64 bytes from 1.2.1.1:seq=2 ttl=64 time=0.061 ms 64 bytes from 1.2.1.1:seq=3 ttl=64 time=0.065 ms 64 bytes from 1.2.1.1:seq=4 ttl=64 time=0.063 ms --- 1.2.1.1 ping statistics --5 packets transmitted,5 packets received,0% packet loss round-trip min/avg/max = 0.061/0.082/0.160 ms # Download the file system.bin from the TFTP server. tftp 1.2.1.1 get system.bin flash:/system.bin # Check whether the version of system.bin matches that of boot.bin. display install package flash:/system.bin flash:/system.bin [Package] Vendor: HP Product: 6125XLG Service name: system Platform version: 7.1.035 Product version: Release 2306 Supported board: mpu [Component] Component: system Description: system package # Load the system image to start the Comware system. install load flash:/system.bin Check package flash:/system.bin ... Extracting package ... Loading... 118