HP LaserJet 5si HP LaserJet 5Si user guide - Page 143
Clearing the Left Door Fuser Area
View all HP LaserJet 5si manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Clearing the Left Door (Fuser Area) 1 Open the left door. If a mailbox accessory is installed, push it away from the printer first to access the left door. W A R N I N G Avoid touching the adjacent fusing area. It may be HOT. 2 Remove any jammed or damaged paper from this area by pulling it in the direction shown by the arrow (A) in Figure 7-5. 3 Lower the two green tabs and carefully check for additional pieces of paper. Remove all scraps. 4 Close the door. 5 Push the mailbox back into place, if one is installed. Figure 7-7 Left Door A. Left door jam B. Fuser area jam 7-30 Maintenance and Troubleshooting EN
Clearing the Left Door (Fuser Area)
1
Open the left door.
If a mailbox accessory is installed, push it away
from the printer first to access the left door.
WARNING
Avoid touching the adjacent fusing area. It may be HOT.
2
Remove any jammed or damaged paper from this area by pulling it in
the direction shown by the arrow (A) in Figure 7-5.
3
Lower the two green tabs and carefully check for additional pieces of
paper. Remove all scraps.
4
Close the door.
5
Push the mailbox back into place, if one is installed.
Left Door
A.
Left door jam
B.
Fuser area jam
Figure 7-7
7-30
Maintenance and Troubleshooting
EN