HP LaserJet 5si HP LaserJet 5Si user guide - Page 159
X.yy Device Error, Cycle Power, Printer Error, Error, Check Configuration, Nvram Full, Restoring
View all HP LaserJet 5si manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Printer Messages, continued If the following errors persist, call your HP-authorized service provider. Message Description Recommended Action 66.x.yy DEVICE ERROR CYCLE POWER The printer identified a paper handling controller error. x identifies the device (1-5) and yy is the error code (0-99) Turn the printer OFF then ON again. 67 PRINTER ERROR 68 ERROR CHECK CONFIGURATION 68 NVRAM FULL CHECK CONFIGURATION 0: Paper Handling Controller (PHC) 1: First device attached to the PHC 2: Second device attached to the PHC 3: Third device attached to the PHC 4: Fourth device attached to the PHC 5: Fifth device attached to the PHC The printer identified a Turn the printer OFF then ON miscellaneous interface hardware again. error. There is a checksum error in the Check all menu settings; reset printer's nonvolatile memory if necessary. Press [Select *] (NVRAM). Some or all of the menu to continue. If you switch the items have been reset to the printer OFF and then ON, you factory default values. may lose settings (to check settings, print a configuration page). The printer's nonvolatile memory (NVRAM) is full. Press [Select *] to continue. The system will automatically perform a cold reset and display RESTORING FACTORY SETTINGS. The system will complete initialization and return to the online condition. 7-46 Maintenance and Troubleshooting Continued on the next page. EN