HP LaserJet 5si HP LaserJet 5Si user guide - Page 77
A3, JIS B5, or JIS B4 with the short
View all HP LaserJet 5si manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
5-10 Print Tasks 4 Place paper into the tray without stacking it above the paperfill mark. Less than 100 sheets of paper may not lay flat. Note For single-sided printing place paper into the tray with side-to-be-printed up. Load 3-hole paper with the holes toward the front of the printer. For two-sided printing place paper with the front side down, and load 3-hole paper with the holes toward the back of the printer. 5 Paper loading differs by size: a. Load Letter and ISO A4 with the longer edge of the page leading into the printer. b. Load envelopes, postcards, Executive, Legal, 11 x 17 in, ISO A3, JIS B5, or JIS B4 with the short edge of the page leading into the printer. Note You may use two-sided printing for sizes equal to or larger than executive size paper. 6 Slide the paper into the printer, until paper fits squarely and firmly between the paper width guides, without bending the paper. 7 Set the correct paper type and size for Tray 1 in the TRAY MENU on the printer control panel. Note Paper heavier than 28-lb (105 g/m2) should be printed from Tray 1 using Manual Feed. If you are using the Top Output Bin, adjust the paper stop guide for the paper size to be printed (see Figure 5-4). EN