IBM 2170275 Reference Guide - Page 105
To install a drive in the lower drive bay, Disconnect the cables from the existing drive.
View all IBM 2170275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Adding and removing hardware . To install a drive in the lower drive bay: 1 Disconnect the cables from the existing drive. 2 Remove the 3.5-inch drive bay from the housing by pressing the tab on top and pivoting the drive bay outward. Note When installing drives in the lower drive bay, the hard disk drive is always below the 3.5-inch diskette drive. Adding and removing drives 101
Adding and removing drives
101
Adding and removing hardware
.
To install a drive in the lower drive bay:
1
Disconnect the cables from the existing drive.
2
Remove the 3.5-inch drive bay from the housing by
pressing the tab on top and pivoting the drive bay
outward.
Note
When installing drives in
the lower drive bay, the
hard disk drive is always
below the 3.5-inch diskette
drive.