IBM 2170275 Reference Guide - Page 63
Real Time Clock Error, Date and time incorrect, CMOS Battery is Bad, CMOS Checksum Error, Equipment
View all IBM 2170275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Troubleshooting Error code and description Here's what to do... 151/163 Real Time Clock Error Date and time incorrect 161 CMOS Battery is Bad 162 CMOS Checksum Error 162 Equipment Configuration Error 164 Memory size changed Enter Setup and reset the date and time. Load the Setup default settings and reset the date and time. If it reoccurs, replace the battery. For more information on using the Setup Utility, see "Using the Setup Utility" on page 71. Load the Setup default settings and reboot the system. Also, check the date and time. For more information on using the Setup Utility, see "Using the Setup Utility" on page 71. 1 This message appears together with other specific error messages indicating the device with an error. First, find the device error message in this table and do the corresponding action. 2 Enter Setup and change the required settings. For information on the Setup Utility options, see the Aptiva online help. If you removed the memory, this is expected. If you did not remove the memory, do the following: 1 Make sure the DIMMs are properly installed, then reboot the system. 2 If you still receive the error message after doing option 1, the DIMMs may be defective. Change the DIMMs. For instructions on working with system board components, see the Aptiva online help. If any of these problems continue after taking the actions listed, run the diagnostics programs that came with your computer. If you need service, see "HelpWare support and services" on page 79. Responding to error codes 59