TP-Link TL-SG5426 User Guide - Page 128
Admin Key, Port Priority, Click Port, LACP, Aggregation Port. Set the System Priority,
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
3 Port Configuration - System priority is combined with the switch's MAC address to form the LAG identifier. This identifier is used to indicate a specific LAG during LACP negotiations with other systems. • Admin Key - The LACP administration key must be set to the same value for ports that belong to the same LAG. (Range: 0-65535; Default: 1) • Port Priority - If a link goes down, LACP port priority is used to select a backup link. (Range: 0-65535; Default: 32768) Set Port Partner - This menu sets the remote side of an aggregate link; i.e., the ports on the attached device. The command attributes have the same meaning as those used for the port actor. However, configuring LACP settings for the partner only applies to its administrative state, not its operational state, and will only take effect the next time an aggregate link is established with the partner. Web - Click Port, LACP, Aggregation Port. Set the System Priority, Admin Key, and Port Priority for the Port Actor. You can optionally configure these settings for the Port Partner. (Be aware that these settings only affect the administrative state of the partner, and will not take effect until the next time an aggregate link is formed with this device.) After you have completed setting the port LACP parameters, click Apply. Figure 3-53 LACP Port Configuration 3-85