TP-Link TL-SG5426 User Guide - Page 73
Renumbering the System,
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3 Configuring the Switch CLI - Enter the host ip address, followed by the mail severity level, source and destination email addresses and enter the sendmail command to complete the action. Use the show logging command to display SMTP information. Renumbering the System Web - Click System, Renumber. Click the Renumber button to renumber the switch. When prompted, confirm that you want to renumber the switch. Figure 3-20 Renumbering the System CLI - Use the reload command to restart the switch. When prompted, confirm that you want to reset the switch. Console#reload System will be restarted, continue ? y 4-22 When restarting the system, it will always run the Power-On Self-Test. Console(config)#logging sendmail host 192.168.1.19 Console(config)#logging sendmail level 3 Console(config)#logging sendmail source-email [email protected] Console(config)#logging sendmail destination-email [email protected] Console(config)#logging sendmail Console# Resetting the System Web - Click System, Reset. Click the Reset button to reboot the switch. When prompted, confirm that you want reset the switch. Figure 3-21 Resetting the System CLI - Use the reload command to restart the switch. When prompted, confirm that you want to reset the switch. Console#reload System will be restarted, continue ? y 4-22 Note: When restarting the system, it will always run the Power-On Self-Test. 3-30