TP-Link TL-SG5426 User Guide - Page 271
Example, Related Commands, Syntax, ip http server, Default Setting, Command Mode
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
4 Command Line Interface Example Console(config)#ip http port 769 Console(config)# Related Commands ip http server (4-30) ip http server This command allows this device to be monitored or configured from a browser. Use the no form to disable this function. Syntax [no] ip http server Default Setting Enabled Command Mode Global Configuration Example Console(config)#ip http server Console(config)# Related Commands ip http port (4-29) ip http secure-server This command enables the secure hypertext transfer protocol (HTTPS) over the Secure Socket Layer (SSL), providing secure access (i.e., an encrypted connection) to the switch's web interface. Use the no form to disable this function. Syntax [no] ip http secure-server Default Setting Enabled Command Mode Global Configuration Command Usage • Both HTTP and HTTPS service can be enabled independently on the switch. However, you cannot configure the HTTP and HTTPS servers to use the same UDP port. • If you enable HTTPS, you must indicate this in the URL that you specify in your browser: https://device[:port_number] 4-30