TP-Link TL-SG5426 User Guide - Page 480
cluster member, rcommand, Example, Syntax, cluster member mac-address, Default Setting, Command Mode
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 480 highlights
4 Command Line Interface • You cannot change the cluster IP pool when the switch is currently in Commander mode. Commander mode must first be disabled. Example Console(config)#cluster ip-pool 10.2.3.4 Console(config)# cluster member This command configures a Candidate switch as a cluster Member. Use the no form to remove a Member switch from the cluster. Syntax cluster member mac-address id no cluster member id mac-address - The MAC address of the Candidate switch. member-id - The ID number to assign to the Member switch. (Range: 1-16) Default Setting No Members Command Mode Global Configuration Command Usage • The maximum number of cluster Members is 16. • The maximum number of switch Candidates is 100. Example Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5 Console(config)# rcommand This command provides access to a cluster Member CLI for configuration. Syntax rcommand id member-id - The ID number of the Member switch. (Range: 1-16) Command Mode Privileged Exec Command Usage • This command only operates through a Telnet connection to the Commander switch. Managing cluster Members using the local console CLI on the Commander is not supported. • There is no need to enter the username and password for access to the Member switch CLI. 4-240