TP-Link TL-SG5426 User Guide - Page 288
Example, Related Commands, Syntax, show logging, flash, sendmail, Default Setting, Command Mode
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
4 System Management Commands Example Console#clear logging Console# Related Commands show logging (4-47) show logging This command displays the configuration settings for logging messages to local switch memory, to an SMTP event handler, or to a remote syslog server. Syntax show logging {flash | ram | sendmail | trap} • flash - Displays settings for storing event messages in flash memory (i.e., permanent memory). • ram - Displays settings for storing event messages in temporary RAM (i.e., memory flushed on power reset). • sendmail - Displays settings for the SMTP event handler (page 4-52). • trap - Displays settings for the trap function. Default Setting None Command Mode Privileged Exec Example The following example shows that system logging is enabled, the message level for flash memory is "errors" (i.e., default level 3 - 0), the message level for RAM is "informational" (i.e., default level 6 - 0). Console#show logging flash Syslog logging: Enabled History logging in FLASH: level errors Console#show logging ram Syslog logging: Enabled History logging in RAM: level informational Console# Table 4-19 show logging flash/ram - display description Field Description Syslog logging Shows if system logging has been enabled via the logging on command. History logging in FLASH The message level(s) reported based on the logging history command. History logging in RAM The message level(s) reported based on the logging history command. 4-47