TP-Link TL-SG5426 User Guide - Page 476
ip dhcp snooping information policy, Example, Syntax, replace, Default Setting, Command Mode
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 476 highlights
4 Command Line Interface identified by the switch port to which they are connected rather than just their MAC address. DHCP client-server exchange messages are then forwarded directly between the server and client without having to flood them to the entire VLAN. • DHCP snooping must be enabled on the switch for the DHCP Option 82 information to be inserted into packets. Example This example enables the DHCP Snooping Information Option. Console(config)#ip dhcp snooping information option Console(config)# ip dhcp snooping information policy This command sets the DHCP snooping information option policy for DHCP client packets that include Option 82 information. Syntax ip dhcp snooping information policy • drop - Discards the Option 82 information in a packet and then floods it to the entire VLAN. • keep - Retains the client's DHCP information • replace - Overwrites the DHCP client packet information with the switch's relay information. Default Setting replace Command Mode Global Configuration Command Usage When the switch receives DHCP packets from clients that already include DHCP Option 82 information, the switch can be configured to set the action policy for these packets. Either the switch can drop the DHCP packets, keep the existing information, or replace it with the switch's relay information. Example Console(config)#ip dhcp snooping information policy drop Console(config)# 4-236