TP-Link TL-SG5426 User Guide - Page 462
interface, members, Syntax, show mvr, ethernet, port-channel, Default Setting, Command Mode
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 462 highlights
4 Multicast Filtering Commands show mvr This command shows information about the global MVR configuration settings when entered without any keywords, the interfaces attached to the MVR VLAN using the interface keyword, or the multicast groups assigned to the MVR VLAN using the members keyword. Syntax show mvr [interface [interface] | members [ip-address]] • interface • ethernet unit/port - unit - Stack unit. (Range: 1) - port - Port number. (Range: 1-26) • port-channel channel-id (Range: 1-12) • ip-address - IP address for an MVR multicast group. (Range: 224.0.1.0 - 239.255.255.255) Default Setting Displays global configuration settings for MVR when no keywords are used. Command Mode Privileged Exec Command Usage Enter this command without any keywords to display the global settings for MVR. Use the interface keyword to display information about interfaces attached to the MVR VLAN. Or use the members keyword to display information about multicast groups assigned to the MVR VLAN. Example The following shows the global MVR settings: Console#show mvr MVR Status:enable MVR running status:TRUE MVR multicast vlan:1 MVR Max Multicast Groups:255 MVR Current multicast groups:10 Console# Table 4-73 show mvr - display description Field Description MVR Status Shows if MVR is globally enabled on the switch. MVR running status Indicates whether or not all necessary conditions in the MVR environment are satisfied. MVR multicast vlan Shows the VLAN used to transport all MVR multicast traffic. MVR Max Multicast Groups Shows the maximum number of multicast groups which can assigned to the MVR VLAN. MVR Current multicast groups Shows the number of multicast groups currently assigned to the MVR VLAN. 4-221