TP-Link TL-SG5426 User Guide - Page 204
Attaching a Policy Map to Ingress Queues, Command Usage, Command Attributes, Ports, Ingress, Enabled
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
3 Quality of Service Attaching a Policy Map to Ingress Queues This function binds a policy map to the ingress queue of a particular interface. Command Usage • You must first define a class map, then define a policy map, and finally bind the service policy to the required interface. • You can only bind one policy map to an interface. • The current firmware does not allow you to bind a policy map to an egress queue. Command Attributes • Ports - Specifies a port. • Ingress - Applies the rule to ingress traffic. • Enabled - Check this to enable a policy map on the specified port. • Policy Map - Select the appropriate policy map from the scroll-down box. Web - Click QoS, DiffServ, Service Policy Settings. Check Enabled and choose a Policy Map for a port from the scroll-down box, then click Apply. Figure 3-96 Service Policy Settings CLI - This example applies a service policy to an ingress interface. Console(config)#interface ethernet 1/5 Console(config-if)#service-policy input rd_policy#3 Console(config-if)# 4-120 4-203 3-161