TP-Link TL-SG5426 User Guide - Page 254
timeout login response, exec-timeout
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
4 Line Commands during system bootup or when downloading the configuration file from a TFTP server. There is no need for you to manually configure encrypted passwords. Example Console(config-line)#password 0 secret Console(config-line)# Related Commands login (4-11) password-thresh (4-14) timeout login response This command sets the interval that the system waits for a user to log into the CLI. Use the no form to restore the default. Syntax timeout login response [seconds] no timeout login response seconds - Integer that specifies the timeout interval. (Range: 0 - 300 seconds; 0: disabled) Default Setting • CLI: Disabled (0 seconds) • Telnet: 600 seconds Command Mode Line Configuration Command Usage • If a login attempt is not detected within the timeout interval, the connection is terminated for the session. • This command applies to both the local console and Telnet connections. • The timeout for Telnet cannot be disabled. • Using the command without specifying a timeout restores the default setting. Example To set the timeout to two minutes, enter this command: Console(config-line)#timeout login response 120 Console(config-line)# Related Commands silent-time (4-15) exec-timeout (4-14) exec-timeout This command sets the interval that the system waits until user input is detected. Use the no form to restore the default. 4-13