TP-Link TL-SG5426 User Guide - Page 323
dot1x default, dot1x max-req, dot1x port-control, Command Mode, Example, Syntax, Default
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
4 Command Line Interface dot1x default This command sets all configurable dot1x global and port settings to their default values. Command Mode Global Configuration Example Console(config)#dot1x default Console(config)# dot1x max-req This command sets the maximum number of times the switch port will retransmit an EAP request/identity packet to the client before it times out the authentication session. Use the no form to restore the default. Syntax dot1x max-req count no dot1x max-req count - The maximum number of requests (Range: 1-10) Default 2 Command Mode Interface Configuration Example Console(config)#interface eth 1/2 Console(config-if)#dot1x max-req 2 Console(config-if)# dot1x port-control This command sets the dot1x mode on a port interface. Use the no form to restore the default. Syntax dot1x port-control {auto | force-authorized | force-unauthorized} no dot1x port-control • auto - Requires a dot1x-aware connected client to be authorized by the RADIUS server. Clients that are not dot1x-aware will be denied access. • force-authorized - Configures the port to grant access to all clients, either dot1x-aware or otherwise. • force-unauthorized - Configures the port to deny access to all clients, either dot1x-aware or otherwise. 4-82