TP-Link TL-SG5426 User Guide - Page 71

3 Configuring the Switch • Host IP Address - Specifies a new server IP address to add to the Host IP List. Web - Click System, Log, Remote Logs. To add an IP address to the Host IP List, type the new IP address in the Host IP Address box, and then click Add. To delete an IP address, click the entry in the Host IP List, and then click Remove. Figure 3-18 Remote Logs CLI - Enter the syslog server host IP address, choose the facility type and set the logging trap. Console(config)#logging host 192.168.1.15 Console(config)#logging facility 23 Console(config)#logging trap 4 Console(config)#end Console#show logging trap Syslog logging: Enabled REMOTELOG status: Enabled REMOTELOG facility type: local use 7 REMOTELOG level type: Warning conditions REMOTELOG server ip address: 192.168.1.15 REMOTELOG server ip address: 0.0.0.0 REMOTELOG server ip address: 0.0.0.0 REMOTELOG server ip address: 0.0.0.0 REMOTELOG server ip address: 0.0.0.0 Console# 4-45 4-45 4-46 4-46 Simple Mail Transfer Protocol SMTP (Simple Mail Transfer Protocol) is used to send email messages between servers. The messages can be retrieved using POP or IMAP clients. Command Attributes • Admin Status - Enables/disables the SMTP function. (Default: Enabled) • Email Source Address - This command specifies SMTP servers email addresses that can send alert messages. 3-28