TP-Link TL-SG5426 User Guide - Page 440

4 Quality of Service Commands service-policy This command applies a policy map defined by the policy-map command to the ingress queue of a particular interface. Use the no form to remove the policy map from this interface. Syntax [no] service-policy input policy-map-name • input - Apply to the input traffic. • policy-map-name - Name of the policy map for this interface. (Range: 1-16 characters) Default Setting No policy map is attached to an interface. Command Mode Interface Configuration (Ethernet, Port Channel) Command Usage • You can only assign one policy map to an interface. • You must first define a class map, then define a policy map, and finally use the service-policy command to bind the policy map to the required interface. Example This example applies a service policy to an ingress interface. Console(config)#interface ethernet 1/1 Console(config-if)#service-policy input rd_policy Console(config-if)# show class-map This command displays the QoS class maps which define matching criteria used for classifying traffic. Syntax show class-map [class-map-name] class-map-name - Name of the class map. (Range: 1-16 characters) Default Setting Displays all class maps. Command Mode Privileged Exec 4-199