TP-Link TL-SG5426 User Guide - Page 318
TACACS+ Client, tacacs-server host
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
4 Authentication Commands TACACS+ Client Terminal Access Controller Access Control System (TACACS+) is a logon authentication protocol that uses software running on a central server to control access to TACACS-aware devices on the network. An authentication server contains a database of multiple user name/password pairs with associated privilege levels for each user or group that require management access to a switch. Command tacacs-server host tacacs-server port tacacs-server key show tacacs-server Table 4-30 TACACS Commands Function Specifies the TACACS+ server Specifies the TACACS+ server network port Sets the TACACS+ encryption key Shows the current TACACS+ settings Mode GC GC GC GC Page 4-77 4-77 4-78 4-78 tacacs-server host This command specifies the TACACS+ server. Use the no form to restore the default. Syntax tacacs-server host host_ip_address no tacacs-server host host_ip_address - IP address of a TACACS+ server. Default Setting 10.11.12.13 Command Mode Global Configuration Example Console(config)#tacacs-server host 192.168.1.25 Console(config)# tacacs-server port This command specifies the TACACS+ server network port. Use the no form to restore the default. Syntax tacacs-server port port_number no tacacs-server port port_number - TACACS+ server TCP port used for authentication messages. (Range: 1-65535) Default Setting 49 4-77