TP-Link TL-SG5426 User Guide - Page 354

4 SNMP Commands Field groupname security model readview writeview notifyview storage-type Row Status Table 4-40 show snmp group - display description Description Name of an SNMP group. The SNMP version. The associated read view. The associated write view. The associated notify view. The storage type for this entry. The row status of this entry. snmp-server user This command adds a user to an SNMP group, restricting the user to a specific SNMP Read, Write, or Notify View. Use the no form to remove a user from an SNMP group. Syntax snmp-server user username groupname [remote ip-address] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password [priv des56 priv-password]] no snmp-server user username {v1 | v2c | v3 | remote} • username - Name of user connecting to the SNMP agent. (Range: 1-32 characters) • groupname - Name of an SNMP group to which the user is assigned. (Range: 1-32 characters) • remote - Specifies an SNMP engine on a remote device. • ip-address - The Internet address of the remote device. • v1 | v2c | v3 - Use SNMP version 1, 2c or 3. • encrypted - Accepts the password as encrypted input. • auth - Uses SNMPv3 with authentication. • md5 | sha - Uses MD5 or SHA authentication. • auth-password - Authentication password. Enter as plain text if the encrypted option is not used. Otherwise, enter an encrypted password. (A minimum of eight characters is required.) • priv des56 - Uses SNMPv3 with privacy with DES56 encryption. • priv-password - Privacy password. Enter as plain text if the encrypted option is not used. Otherwise, enter an encrypted password. 4-113