TP-Link TL-SG5426 User Guide - Page 406
switchport gvrp, show gvrp configuration, Syntax, Default Setting, Command Mode, Example, ethernet
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
4 VLAN Commands switchport gvrp This command enables GVRP for a port. Use the no form to disable it. Syntax [no] switchport gvrp Default Setting Disabled Command Mode Interface Configuration (Ethernet, Port Channel) Example Console(config)#interface ethernet 1/6 Console(config-if)#switchport gvrp Console(config-if)# show gvrp configuration This command shows if GVRP is enabled. Syntax show gvrp configuration [interface] interface • ethernet unit/port - unit - Stack unit. (Range: Unit 1) - port - Port number. (Range: 1-26) • port-channel channel-id (Range: 1-4) Default Setting Shows both global and interface-specific configuration. Command Mode Normal Exec, Privileged Exec Example Console#show gvrp configuration ethernet 1/6 Eth 1/ 6: GVRP configuration: Enabled Console# 4-165