TP-Link TL-SG5426 User Guide - Page 442

Command Mode Privileged Exec Example Console#show policy-map interface ethernet 1/5 Service-policy rd_policy input Console# 4 Example Multicast Filtering Commands This switch uses IGMP (Internet Group Management Protocol) to query for any attached hosts that want to receive a specific multicast service. It identifies the ports containing hosts requesting a service and sends data out to those ports only. It then propagates the service request up to any neighboring multicast switch/router to ensure that it will continue to receive the multicast service. Table 4-67 Multicast Filtering Commands Command Groups Function IGMP Snooping Configures multicast groups via IGMP snooping or static assignment, sets the IGMP version, displays current snooping and query settings, and displays the multicast service and group members IGMP Query Configures IGMP query parameters for multicast filtering at Layer 2 Static Multicast Routing Configures static multicast router ports IGMP Filtering and Throttling Configures IGMP filtering and throttling Multicast VLAN Registration Configures a single network-wide multicast VLAN shared by hosts residing in other standard or private VLAN groups, preserving security and data isolation for normal traffic Page 4-201 4-206 4-209 4-211 4-212 IGMP Snooping Commands Table 4-68 IGMP Snooping Commands Command Function ip igmp snooping Enables IGMP snooping ip igmp snooping vlan static Adds an interface as a member of a multicast group ip igmp snooping version Configures the IGMP version for snooping ip igmp snooping leave-proxy Enables IGMP leave proxy on the switch ip igmp snooping immediate-leave Enables IGMP immediate leave for a VLAN interface show ip igmp snooping Shows the IGMP snooping and query configuration show mac-address-table Shows the IGMP snooping MAC multicast list multicast Mode GC GC GC GC Page 4-202 4-202 4-203 4-203 IC 4-204 PE 4-203 PE 4-205 4-201