TP-Link TL-SG5426 User Guide - Page 424
show protocol-vlan protocol-group, Example, Syntax, Default Setting, Command Mode, ethernet
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 424 highlights
4 VLAN Commands - If the frame is untagged but the protocol type does not match, the frame is forwarded to the default VLAN for this interface. Example The following example maps the traffic entering Port 1 which matches the protocol type specified in protocol group 1 to VLAN 2. Console(config)#interface ethernet 1/1 Console(config-if)#protocol-vlan protocol-group 1 vlan 2 Console(config-if)# show protocol-vlan protocol-group This command shows the frame and protocol type associated with protocol groups. Syntax show protocol-vlan protocol-group [group-id] group-id - Group identifier for a protocol group. (Range: 1-2147483647) Default Setting All protocol groups are displayed. Command Mode Privileged Exec Example This shows protocol group 1 configured for IP over Ethernet: Console#show protocol-vlan protocol-group ProtocolGroup ID Frame Type Protocol Type 1 ethernet 08 00 Console# show interfaces protocol-vlan protocol-group This command shows the mapping from protocol groups to VLANs for the selected interfaces. Syntax show interfaces protocol-vlan protocol-group [interface] interface • ethernet unit/port - unit - Stack unit. (Range: 1-8) - port - Port number. (Range: 1-26) • port-channel channel-id (Range: 1-4) Default Setting The mapping for all interfaces is displayed. 4-183