TP-Link TL-SG5426 User Guide - Page 235
Static IP Source Guard Binding Configuration, Command Attributes, Filter Type, SIP-MAC
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
3 Configuring the Switch Command Attributes • Filter Type - Configures the switch to filter inbound traffic based source IP address, or source IP address and corresponding MAC address. (Default: None) • None - Disables IP source guard filtering on the port. • SIP - Enables traffic filtering based on IP addresses stored in the binding table. • SIP-MAC - Enables traffic filtering based on IP addresses and corresponding MAC addresses stored in the binding table. Web - Click IP Source Guard, Port Configuration. Figure 3-119 IP Source Guard Port Configuration CLI - This example shows how to enable IP source guard on port 5. Console(config)#interface ethernet 1/5 Console(config-if)#ip source-guard sip Console(config-if)#end Console#show ip source-guard Interface Filter-type Eth 1/1 DISABLED Eth 1/2 DISABLED Eth 1/3 DISABLED Eth 1/4 DISABLED Eth 1/5 SIP Eth 1/6 DISABLED . . 4-227 4-230 Static IP Source Guard Binding Configuration Adds a static addresses to the source-guard binding table. Table entries include a MAC address, IP address, lease time, entry type (Static, Dynamic), VLAN identifier, and port identifier. All static entries are configured with an infinite lease time, which is indicated with a value of zero in the table. 3-192