TP-Link TL-SG5426 User Guide - Page 304

4 System Management Commands Example Console#show version Unit1 Serial number: Service tag: Hardware version: Module A type: Module B type: Number of ports: Main power status: Redundant power status S416000937 R01 1000BaseT 1000BaseT 26 up :not present Agent (master) Unit ID: Loader version: Boot ROM version: Operation code version: 1 2.2.1.4 2.2.1.8 2.2.7.1 Console# Frame Size Commands Command jumbo frame Table 4-24 Frame Size Commands Function Enables support for jumbo frames Mode GC Page 4-63 jumbo frame This command enables support for jumbo frames. Use the no form to disable it. Syntax [no] jumbo frame Default Setting Disabled Command Mode Global Configuration Command Usage • This switch provides more efficient throughput for large sequential data transfers by supporting jumbo frames up to 9216 bytes. Compared to standard Ethernet frames that run only up to 1.5 KB, using jumbo frames significantly reduces the per-packet overhead required to process protocol encapsulation fields. • To use jumbo frames, both the source and destination end nodes (such as a computer or server) must support this feature. Also, when the connection is operating at full duplex, all switches in the network between the two end nodes must be able to accept the extended frame size. And for half-duplex connections, all devices in the collision domain would need to support jumbo frames. 4-63