TP-Link TL-SG5426 User Guide - Page 352
Default Setting, Command Mode, Command Usage, snmp-server user, snmp-server enable traps, Example
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 352 highlights
4 SNMP Commands Default Setting • Default groups: public17 (read only), private18 (read/write) • readview - Every object belonging to the Internet OID space (1.3.6.1). • writeview - Nothing is defined. • notifyview - Nothing is defined. Command Mode Global Configuration Command Usage • A group sets the access policy for the assigned users. • When authentication is selected, the MD5 or SHA algorithm is used as specified in the snmp-server user command. • When privacy is selected, the DES 56-bit algorithm is used for data encryption. • For additional information on the notification messages supported by this switch, see "Supported Notification Messages" on page 5-13. Also, note that the authentication, link-up and link-down messages are legacy traps and must therefore be enabled in conjunction with the snmp-server enable traps command (page 4-106). Example Console(config)#snmp-server group r&d v3 auth write daily Console(config)# 17. No view is defined. 18. Maps to the defaultview. 4-111