TP-Link TL-SG5426 User Guide - Page 129

3 Configuring the Switch CLI - The following example configures LACP parameters for ports 1-4. Ports 1-4 are used as active members of the LAG. Console(config)#interface ethernet 1/1 4-116 Console(config-if)#lacp actor system-priority 3 4-133 Console(config-if)#lacp actor admin-key 120 4-134 Console(config-if)#lacp actor port-priority 128 4-136 C...onsole(config-if)#exit Console(config)#interface ethernet 1/4 Console(config-if)#lacp actor system-priority 3 Console(config-if)#lacp actor admin-key 120 Console(config-if)#lacp actor port-priority 512 Console(config-if)#end Console#show lacp sysid 4-136 Port Channel System Priority System MAC Address 1 3 00-12-CF-31-31-31 2 32768 00-12-CF-31-31-31 3 32768 00-12-CF-31-31-31 4 32768 00-12-CF-31-31-31 Console#show lacp 1 internal 4-136 Port channel : 1 Oper Key : 120 Admin Key : 0 Eth 1/1 LACPDUs Internal: 30 sec LACP System Priority: 3 LACP Port Priority: 128 Admin Key: 120 Oper Key: 120 Admin State : defaulted, aggregation, long timeout, LACP-activity Oper State: distributing, collecting, synchronization, aggregation, long timeout, LACP-activity . . . Displaying LACP Port Counters You can display statistics for LACP protocol messages. Field LACPDUs Sent LACPDUs Received Marker Sent Marker Received Table 3-7 LACP Port Counters Description Number of valid LACPDUs transmitted from this channel group. Number of valid LACPDUs received on this channel group. Number of valid Marker PDUs transmitted from this channel group. Number of valid Marker PDUs received by this channel group. 3-86