TP-Link TL-SG5426 User Guide - Page 305

4 Command Line Interface • Enabling jumbo frames will limit the maximum threshold for broadcast storm control to 64 packets per second. (See the switchport broadcast command on page 4-122.) • The current setting for jumbo frames can be displayed with the show system command (page 4-61). Example Console(config)#jumbo frame Console(config)# Flash/File Commands These commands are used to manage the system code or configuration files. Command copy delete dir whichboot boot system Table 4-25 Flash/File Commands Function Mode Page Copies a code image or a switch configuration to or from flash PE 4-64 memory or a TFTP server Deletes a file or code image PE 4-67 Displays a list of files in flash memory PE 4-68 Displays the files booted PE 4-69 Specifies the file or image used to start up the system GC 4-69 copy This command moves (upload/download) a code image or configuration file between the switch's flash memory and a TFTP server. When you save the system code or configuration settings to a file on a TFTP server, that file can later be downloaded to the switch to restore system operation. The success of the file transfer depends on the accessibility of the TFTP server and the quality of the network connection. Syntax copy file {file | running-config | startup-config | tftp | unit} copy running-config {file | startup-config | tftp} copy startup-config {file | running-config | tftp} copy tftp {file | running-config | startup-config | https-certificate | public-key} copy unit file • file - Keyword that allows you to copy to/from a file. • running-config - Keyword that allows you to copy to/from the current running configuration. • startup-config - The configuration used for system initialization. • tftp - Keyword that allows you to copy to/from a TFTP server. 4-64