TP-Link TL-SG5426 User Guide - Page 309

4 Command Line Interface dir This command displays a list of files in flash memory. Syntax dir [unit:] {{boot-rom: | config: | opcode:} [:filename]} The type of file or image to display includes: • boot-rom - Boot ROM (or diagnostic) image file. • config - Switch configuration file. • opcode - Run-time operation code image file. • filename - Name of the configuration file or code image. • unit - Stack unit. (Range: Unit 1) Default Setting None Command Mode Privileged Exec Command Usage • If you enter the command dir without any parameters, the system displays all files. • A colon (:) is required after the specified unit number. • File information is shown below: Column Heading file name file type startup size Table 4-26 File Directory Information Description The name of the file. File types: Boot-Rom, Operation Code, and Config file. Shows if this file is used when the system is started. The length of the file in bytes. Example The following example shows how to display all file information: Console#dir 1: file name file type startup size (byte) D2218 Boot-Rom image Y 214124 V2271 Operation Code Y 1761944 Factory_Default_Config.cfg Config File Y 5197 Total free space: 5242880 Console# 4-68