TP-Link TL-SG5426 User Guide - Page 174
Command Attributes, Interface, Member, Non-Member, Port Index
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
3 VLAN Configuration CLI - The following example adds tagged and untagged ports to VLAN 2. Console(config)#interface ethernet 1/1 Console(config-if)#switchport allowed vlan add 2 tagged Console(config-if)#exit Console(config)#interface ethernet 1/2 Console(config-if)#switchport allowed vlan add 2 untagged Console(config-if)#exit Console(config)#interface ethernet 1/13 Console(config-if)#switchport allowed vlan add 2 tagged 4-116 4-173 Adding Static Members to VLANs (Port Index) Use the VLAN Static Membership by Port menu to assign VLAN groups to the selected interface as a tagged member. Command Attributes • Interface - Port or trunk identifier. • Member - VLANs for which the selected interface is a tagged member. • Non-Member - VLANs for which the selected interface is not a tagged member. Web - Open VLAN, 802.1Q VLAN, Static Membership by Port. Select an interface from the scroll-down box (Port or Trunk). Click Query to display membership information for the interface. Select a VLAN ID, and then click Add to add the interface as a tagged member, or click Remove to remove the interface. After configuring VLAN membership for each interface, click Apply. Figure 3-76 VLAN Static Membership by Port CLI - This example adds Port 3 to VLAN 1 as a tagged port, and removes Port 3 from VLAN 2. Console(config)#interface ethernet 1/3 Console(config-if)#switchport allowed vlan add 1 tagged Console(config-if)#switchport allowed vlan remove 2 4-116 4-173 3-131