TP-Link TL-SG5426 User Guide - Page 261
disable
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
4 Command Line Interface Default Setting Level 15 Command Mode Normal Exec Command Usage • "super" is the default password required to change the command mode from Normal Exec to Privileged Exec. (To set this password, see the enable password command on page 4-26.) • The "#" character is appended to the end of the prompt to indicate that the system is in privileged access mode. Example Console>enable Password: [privileged level password] Console# Related Commands disable (4-20) enable password (4-26) disable This command returns to Normal Exec mode from privileged mode. In normal access mode, you can only display basic information on the switch's configuration or Ethernet statistics. To gain access to all commands, you must use the privileged mode. See "Understanding Command Modes" on page 4-5. Default Setting None Command Mode Privileged Exec Command Usage The ">" character is appended to the end of the prompt to indicate that the system is in normal access mode. Example Console#disable Console> Related Commands enable (4-19) 4-20