TP-Link TL-SG5426 User Guide - Page 163

3 Configuring the Switch CLI - This displays STA settings for instance 0, followed by settings for each port. The settings for instance 0 are global settings that apply to the IST, the settings for other instances only apply to the local spanning tree. Console#show spanning-tree mst 0 4-231 Spanning-tree information Spanning tree mode :MSTP Spanning tree enable/disable :enable Instance :0 Vlans configuration :1-4094 Priority :32768 Bridge Hello Time (sec.) :2 Bridge Max Age (sec.) :20 Bridge Forward Delay (sec.) :15 Root Hello Time (sec.) :2 Root Max Age (sec.) :20 Root Forward Delay (sec.) :15 Max hops :20 Remaining hops :20 Designated Root :32768.0.0000ABCD0000 Current root port :1 Current root cost :200000 Number of topology changes :1 Last topology changes time (sec.):645 Transmission limit :3 Path Cost Method :long Eth 1/ 1 information Admin status : enable Role : root State : forwarding External path cost : 100000 Internal path cost : 100000 Priority : 128 Designated cost : 200000 Designated port : 128.24 Designated root : 32768.0.0000ABCD0000 Designated bridge : 32768.0.0030F1552000 Fast forwarding : disable Forward transitions : 1 Admin edge port : enable Oper edge port : disable Admin Link type : auto Oper Link type : point-to-point Spanning Tree Status : enable ... Configuring Interface Settings for MSTP You can configure the STA interface settings for an MST Instance using the MSTP Port Configuration and MSTP Trunk Configuration pages. Field Attributes The following attributes are read-only and cannot be changed: • STA State - Displays current state of this port within the Spanning Tree. (See "Displaying Interface Settings" on page 3-111 for additional information.) 3-120