TP-Link TL-SG5426 User Guide - Page 299
Command Usage, show running-config, Example, VLAN configuration settings for each interface
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
4 Command Line Interface Command Usage • Use this command in conjunction with the show running-config command to compare the information in running memory to the information stored in non-volatile memory. • This command displays settings for key command modes. Each mode group is separated by "!" symbols, and includes the configuration mode command, and corresponding commands. This command displays the following information: - SNMP community strings - Users (names and access levels) - VLAN database (VLAN ID, name and state) - VLAN configuration settings for each interface - IP address configured for the switch - Spanning tree settings - Any configured settings for the console port and Telnet Example Console#show startup-config building startup-config, please wait..... ! ! username admin access-level 15 username admin password 0 admin ! username guest access-level 0 username guest password 0 guest ! enable password level 15 0 super ! snmp-server community public ro snmp-server community private rw ! logging history ram 6 logging history flash 3 ! vlan database vlan 1 name DefaultVlan media ethernet state active ! interface ethernet 1/1 switchport allowed vlan add 1 untagged ...switchport native vlan 1 interface vlan 1 ip address dhcp ! line console ! line vty ! end Console# 4-58