TP-Link TL-SG5426 User Guide - Page 315
radius-server host
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
4 Command Line Interface radius-server host This command specifies primary and backup RADIUS servers and authentication parameters that apply to each server. Use the no form to restore the default values. Syntax [no] radius-server index host {host_ip_address | host_alias} [auth-port auth_port] [timeout timeout] [retransmit retransmit] [key key] • index - Allows you to specify up to five servers. These servers are queried in sequence until a server responds or the retransmit period expires. • host_ip_address - IP address of server. • host_alias - Symbolic name of server. (Maximum length: 20 characters) • port_number - RADIUS server UDP port used for authentication messages. (Range: 1-65535) • timeout - Number of seconds the switch waits for a reply before resending a request. (Range: 1-65535) • retransmit - Number of times the switch will try to authenticate logon access via the RADIUS server. (Range: 1-30) • key - Encryption key used to authenticate logon access for client. Do not use blank spaces in the string. (Maximum length: 20 characters) Default Setting • auth-port - 1812 • timeout - 5 seconds • retransmit - 2 Command Mode Global Configuration Example Console(config)#radius-server 1 host 192.168.1.20 auth-port 181 timeout 10 retransmit 5 key green Console(config)# radius-server port This command sets the RADIUS server network port. Use the no form to restore the default. Syntax radius-server port port_number no radius-server port port_number - RADIUS server UDP port used for authentication messages. (Range: 1-65535) Default Setting 1812 4-74