TP-Link TL-SG5426 User Guide - Page 382
clear mac-address-table dynamic, show mac-address-table
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
4 Address Table Commands Command Usage The static address for a host device can be assigned to a specific port within a specific VLAN. Use this command to add static addresses to the MAC Address Table. Static addresses have the following characteristics: • Static addresses will not be removed from the address table when a given interface link is down. • Static addresses are bound to the assigned interface and will not be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the address table. • A static address cannot be learned on another port until the address is removed with the no form of this command. Example Console(config)#mac-address-table static 00-12-cf-94-34-de interface ethernet 1/1 vlan 1 delete-on-reset Console(config)# clear mac-address-table dynamic This command removes any learned entries from the forwarding database and clears the transmit and receive counts for any static or system configured entries. Default Setting None Command Mode Privileged Exec Example Console#clear mac-address-table dynamic Console# show mac-address-table This command shows classes of entries in the bridge-forwarding database. Syntax show mac-address-table [address mac-address [mask]] [interface interface] [vlan vlan-id] [sort {address | vlan | interface}] • mac-address - MAC address. • mask - Bits to match in the address. • interface • ethernet unit/port - unit - Stack unit. (Range: Unit 1) - port - Port number. (Range: 1-26) • port-channel channel-id (Range: 1-4) • vlan-id - VLAN ID (Range: 1-4094) 4-141